Today, there are no restrictions regarding home furnishings, so every owner tries to create a special design. For this purpose, various methods are used, including the installation of a unique interior door with glass. An expert will help to make the idea a reality. The installing interior door by yourself is also possible. The owner needs to prepare for this in advance, so that the result corresponds to expectations. Learn what tools are required and where to start by reading this useful guide.
How To Remove A Door
The first thing to do is to remove the old door. To this end, you need to start by removing the hinges. Remember that you will need to hold on to the structure to prevent it from falling. So that you do not have difficulties, you can use a wedge on the side where the hinges are missing.
Dismantling hanging interior doors begins with the upper part. In this way it is possible to ensure the stability of the construction. While doing so, hold the leaf with your free hand. After the upper hinge has been removed, you can dismantle the lower one.
Prepare To Instal Your Interior Door
Preparing to replace interior doors begins with clearing the space. The tools and materials that will be needed in the process should be on hand. Otherwise, difficulties may arise with the dismantling and installation of the exterior door.
Availability of the required equipment and elements will avoid complications. Dismantling, which is carried out independently, requires special attention to safety. It is recommended to remove sharp objects and follow the instructions carefully.
Follow These Steps Installing Interior Door
To install interior door, you need to complete a few simple steps. Make sure that you have easy access to the tools that you will need to do the job. Get help if you need it. The results depend on the craftsman’s care and concentration.
Step 1: Measure
Choosing the correct door will reduce the duration of the installation. For this reason, you need to take measurements in advance, taking into account the need for sufficient clearance. Installing interior doors will be without problems if the difference between the door leaf and the door frame is 8-10 cm.
Step 2: Determine the side to place the loops
It is often difficult to notice your mistakes before the process is complete. To avoid disappointing results, consider a few simple recommendations:
- interior doors should be installed with the glossy side of the glass facing the room;
- the frosted surface of the glass should face the hallway;
- try swinging open a door that has not yet been installed, and decide on the placement of the hinges.
If you do not know how to install inside doors, it is worth keeping the instructions at hand. This way you can verify that you are doing the dismantling and installation correctly.
Step 3: Install the hinges
The distance from the beginning of the door to the center of the hinge is about 25 cm. To find the correct place for the screws to go in, use a ruler to mark your chosen location. Secure the hinges on the interior door before installation begins. This will make the process much easier.
Step 4: Assemble the door frame
To install the doors, you will need to install the door frame. If the installation is done without replacing the frame, you will save a lot of time. You can keep the old frame if you choose a pre-hung door that fits the dimensions of the previous model.
Step 5: Install the door
Experts recommend beginners who do not know how to set interior doors, use a level. Misalignment can cause problems during installation, so it’s worth checking that you are doing it correctly.
Tools Required
For installation you will need to prepare:
- drill;
- level;
- fret-saw;
- pencil;
- screwdriver.
Cordless equipment is worth considering for ease of use.
Materials Required
Performing installation and dismantling is carried out in the presence of:
- a pair of hinges;
- screws;
- door frame;
- casings.
Often, the door comes complete with the necessary accessories.
Conclusion
In order not to find out how to hang interior doors, it is worth using the services of United Porte masters. This way you can avoid mistakes and get the desired result. It is not recommended to install doors without proper experience.
